How to restore OS image manually with Clonezilla on HP DL380 unit.
-Boot into boot menu by pressing F11 button at startup.
-Select Restore USB.
-Select Clonezilla live (To RAM, boot media can be removed later)
-Select en_US.UTF-8 English.
-Select Don't touch keymap.
-Select Start_clonezilla.
-Select device-image.
-Select Local Dev.
-You will be prompted to press “Enter” to continue. Press Enter.
-Press Ctrl-C to exit this window.
-Select the USB stick.
-Press the right arrow twice and it should be on Done. Press enter.
-You will be prompted to press “Enter” to continue. Press Enter.
-Select Beginner.
-Select Restoredisk.
-The image file should be listed. It will start with “DL380…” Press enter.
-The OS disk should be listed. Press enter.
-Select -scr.
-Select -p poweroff.
-You will be prompted to press “Enter” to continue. Press Enter.
-You will be prompted to type y to continue. Press y and enter.
-You will be prompted again to type y to continue. Press y and enter.
Once the progress reaches 100% and the imaging is complete, the unit will shutdown. Remove the restore USB and power up the unit.