How to replace touchscreen display on ZX

Owned by Howard Chan
Last updated: Jun 22, 2021
2 min read

-Remove left handle from case. 6 screws.

 

-Remove side plate screws. 2 screws.

-Remove HDMI and micro USB connectors from display. Slide them out to the right of the display. Remove bigger HDMI first and then the smaller micro USB.

-Remove side plate. Slide the display assembly to the left and it should loosen the side plate for removal.

-Slide the display assembly all the way out.

-To remove the display from the display mount, loosen these four screws.

-Remove the display protective plastic before installing.

-Installation is the reverse of removal. Dont use too much force when tightening the four screws to the display mount.