The Cinedeck machine should be powered off
Turn off any front storage drives. Remove or disconnect any USB or SATA drives.
Insert the Restore USB to one of the backpanel USB ports. I normally use the one closest to the power supply.
Insert a keyboard.
Power up the Cinedeck machine and keep tapping the delete key to enter the BIOS.
Go to the last page and under boot override, select the Restore USB.
The restore process will begin to load. You will be prompted twice to press 'y' and enter to confirm you want to deploy the image. You will see a blue screen with red progress bar.
After the restore is complete, select power off.
Remove the Restore USB, turn on and reconnect any storage drives.
Power up the unit.