Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Let's get started!

  1. Please either create a Flow or use the existing one in the section ‘Media connect’ - /wiki/spaces/CDK/pages/1392771073

  2. Be sure there is a signal coming to the Input

  3. Get the IP and Port from Media connect Output to generate the url for Cinedeck (Listener address and port info on the screenshot):

Please note, Step 3 and Step 4 should be already in place! This is just a reminder for you to set them up.

3. Open Cinedeck client - add deck. Then choose Input source - Configure Input source - Add deck. Please enter the IP address of the deck and click Save:

4. Drag and Drop Inputs for channels

5. Open Preset settings - Input tab and select SRT caller as an Input type:

5. Enter SRT address in the following format srt://<ip>:<port> (for example: srt://44.194.192.27:9001). These parameters can be found on step 3

6. Select resolution and framerate and get a stream. SRT Caller button becomes green once all is set (see the bottomline of the window on the screenshot below):

Now your SRT Caller mode is connected via Media Connect.

  • No labels