The selected root page could not be found.
The Output tab controls physical output preferences. One of the most common cases is moving the LT/RT audio output from channels 7/8 to ch1/2 for monitoring in edit bays that only have 4ch de-embedders.
Output resolution up-conversion is enabled here. This allows nonstandard or lower resolution files to play out at the input resolution.
444 Playout can be set to single cable 3G dual link, dual cable 1.5G dual link, or converted to YUV10 for playout in non-rgb signal paths.
Audio output routing for SDI, AES and IP formats is set here.
