| Page Tree | ||
|---|---|---|
|
Step 0) Preparation
Editshare Connect should be installed on the server and the desired Media Space mounted as a driver letter. Flow Proxy files are written to a Flow-specific path and this path does not need to be mounted in Connect.
Step 1) Client Side Setup
The EditShare Media Space will need to be mounted with EditShare Connect client and have a drive letter.
Step 2) Additional Setup of Client
If you want to capture a realtime proxy file on the Server and check it into Flow on capture finalization, enable the following Proxy encoder settings:
Encoder: Enabled
Codec: H264 GPU
Quality: SD 720x486 800kbps (or adjust to desired setting, this setting is close to Flow default proxy setting for HD capture)
Wrapper: MP4
Step 3) EFS Flow Setup
Set the password of the "flow" user in Flow Control, then enter the same password here in the Cinedeck EditShare Config.
In Flow Control, make sure you set the controls for the Flow user to enable the following function permissions:
Metadata Write Access
Locked Metadata Write Access
Delete Files
Update Avid PMR